Kit handpump, Van Reekum

last updated : 2018/12/31
Code Description Budget Price Ship. weight Ship. vol.
KWATPUMHVAN80
KIT, HANDPUMP, VAN REEKUM SWN 80 PUMP on request 0kg 0 Add
KWATPUMHVAN90
KIT, HANDPUMP, VAN REEKUM SWN 90 PUMP on request 0kg 0 Add

General information

Lever-operated lift pump for depth settings of up to 60 metres.

  • SWN 80, suitable for depths of up to 40 metres.
  • SWM 90, suitable for depths of up to 60 metres.

For depths of up to 40m, SWN 80 uses a combination of a 1&fraq12;"-thick wall, a high-impact PVC riser, together with a 10mm stainless steel pump rod, protected by a polyethylene sleeve.

For depths of up to 60m, the SWN 90, due to the stretching and snaking of the PVC riser pipes, uses a glass fibre riser and rod combination. Pipe dimensions 46x36mm; rod dimensions 12mm: all with threaded connections; suitable for potable water; and high resistance to corrosion, chemicals, pressure, temperature, shocks and torsion.

Pump performance:

  • 2" cylinder, 0.4l litre/per stroke
  • 2 &fraq12;" cylinder 0.5l litre/per stroke
  • 3" cylinder 0.7l litre/per stroke

Optional pump stand with pressure unit: A high quality pressure unit, of standard construction, can be installed on every SWN pump stand to facilitate overhead tank filling.

Meets VLOM (village level operated maintenance) requirements.

Minimum borehole diameter:100mm.

Ordered through Geneva.

Specifications

Pump head (A) is of sturdy construction, hot-dip galvanized head, with oversized bearings: bearing housings are suitable for both ball and journal bearings.

Pump stand (B), supporting the pump head, is completely hot-dip galvanized, with the inside protected by a thick layer of bituminous coating.

The riser and rod combination (D) with a 1&fraq12;"-thick wall, high-impact PVC riser, together with a 10mm stainless steel pump rod, is protected by a polyethylene sleeve.

SWN 80 riser and rod combinations are available in lengths of 4, 3, 2, 1.5 and 0.75m.

SWN 90 glass fibre riser and rod combinations are available in lengths of 1, 2, 3, 5 and 8m, with an approximate weight of 1.4kg/m.

The pump cylinder (E) is supplied with a bi-directional neoprene rubber piston; all parts of the cylinder are made of corrosion-resistant materials.

 

Composed of:

Pump head (A)

Pump stand (B)

Riser and rod combination (D) – lengths depend on request

Pump cylinder (E)

Spares