General information
For construction works, or in any situations where earth should be moved in large quantities. This is a light weight 4x4 digger, and can be equipped with front loader, digger, and pallet forks (included in specification below).
Depending on attachment this piece of equipment could be used for light construction works (drains, shallow foundations, pits), solid waste moving and pallet moving. Digger can operate on soft terrain, roads, and airport pavement.
Supplied with the appropriate trailer for moving it to the place of work, and with a maintenance set. A standard Toyota Land Cruiser can tow it.
Specifications
Characteristics of the Avant 750series 4x4 digger:
Maximum lifting weight: |
1400kg when correctly balasted |
Boom Float system: |
Telescopic arm with self levelling system |
Maximum lifting capacity (hydraulic): |
21kN (2100kp) |
Maximum lifting height: |
3010mm |
Maximum breakout force on 50cm. |
1400kg |
Engine: |
Diesel engine 36kW (49hp), watercooled 4cyl, Kubota V2403 |
Transmission: |
Direct hydrostatic four wheel drive with release valve |
Hydraulic mains: |
Variable displacement drive pump
Hydraulic oil cooler with two fans |
Auxiliary hydraulic oil flow: |
2 pumps producing 70lites / min |
Operator safety: |
Roll Over Protective Structure safety frame with Falling Object Protective Structure and plexiglass canopy |
Equipment: |
1400mm 4 in 1 Bucket / 192kg
Front Hoe 260 / 370kg
1280mm high tip bucket / 160kg
1100mm pallet forks / 105kg |
Tyres: |
Faom filled tyres / 240kg, 29x12.5-15” wheels tractor profile |
Maximum speed: |
Drive speed max 25km/h |
Instruments: |
Multifuntion joystick. Tachometer hour, temperature gauge, fuel gauge. |
Seat: |
Heated suspension seat, arm rests, and seat belt |
Weight (indicative value): |
Machine weight 1720kg
Integrated rear weight 170kg |
Length (indicative value): |
3030mm |
Width (indicative value): |
1370mm |
Total height (indicative value): |
2110mm |
Turning radius, inside/outside: |
1240mm/2780mm |
Transport trailer: |
5m x 2.1m 420-5200 with 40mm eye tow ring 1 |
Spare parts maintenance set
Description |
Qty |
Filter kit 745/750 |
3 |
WORK LIGHT COBO 12V/27W |
2 |
SLIDE PAD 15*72*194 |
2 |
SLIDE PAD 15*72*78 |
2 |
PIVOT PIN F35-88 |
2 |
PIVOT PIN F40-147 |
2 |
SLIDE BEARING BRM-80 TFP-3550 F39/F35-5 |
2 |
SLIDE BEARING BRM-80 TFP-4040 F44/F40-4 |
2 |
HYDR. HOSE L=1600 2LW-06 |
1 |
HYDR. HOSE L=1300 2LW-06 |
1 |
HYDR. HOSE L=1250 2LW-08 |
3 |
Red Switch |
1 |
Green Switch |
1 |
ROD END BEARING ASAHI JAM 6 |
2 |
PIN, CONTROL LEVERS |
2 |
Battery 12V 75AH 730 |
1 |
Hydr. Cylinder Steering 50/30-172 |
1 |
750 Wheel Nuts |
10 |