Nails - Standard products catalogue IFRC ICRC

Code	Description	Budget Price	Ship. weight	Ship. vol.
EHDWNAILRS01	NAILS, ROOFING, 75mm (3"), hot galva. + rubber washer, 0.5kg	on request	0.5kg	0	Add

EHDWNAILS025	NAIL, steel, for concrete, 2.5cm (1")	CH 0.20	1kg	0,142L	Add

EHDWNAILS050	NAIL, steel, for concrete, 5cm (2")	CH 0.80	1kg	1,9901L	Add

EHDWNAILS080	NAIL, steel, for concrete, 8cm (3"), per kg	on request	1kg	0	Add

EHDWNAILT012	NAIL, tack nail, 1.2cm (1/2"), iron, per kg	on request	1kg	0	Add

EHDWNAILT025	NAIL, tack nail, 2.5cm (1"), iron, per kg	on request	1kg	0	Add

EHDWNAILU012	NAIL, U shape, 1.2cm (1/2"), iron, per kg	on request	1kg	0	Add

EHDWNAILU025	NAIL, U shape, 2.5cm (1"), iron, per kg	on request	1kg	0	Add

EHDWNAILW025	NAILS, hot galvanised iron, for wood, 2.5cm (1")	CH 12.50	1kg	0,4364L	Add

EHDWNAILW040	NAILS, hot galvanised iron, for wood, 40mm, (1.1/2")	on request	0.5kg	0	Add

EHDWNAILW050	NAILS, hot galvanised iron, for wood, 5cm (2"), 1kg	CH 20.50	1kg	0	Add

EHDWNAILW075	NAILS, hot galvanised iron, for wood, 7.5cm (3")	on request	0.5kg	0	Add

EHDWNAILW080	NAILS, hot galvanised iron, for wood, 8cm (3"), 1kg	CH 13.10	1kg	0	Add

EHDWNAILW100	NAILS, hot galvanised iron, for wood, 10cm (4"), 1kg	on request	1kg	0	Add

EHDWNAILW120	NAILS, hot galvanised iron, for wood, 12.5cm (5"), 1kg	on request	1kg	0	Add

EHDWNAILW150	NAILS, hot galvanised iron, for wood, 15cm (6"), 1kg	on request	1kg	0	Add

EHDWNAILW200	NAILS, hot galvanised iron, for wood, 20cm (8")	on request	1kg	0	Add

EHDWNAILX025	NAILS, plain iron, for wood, 2.5cm (1")	on request	1kg	0	Add

EHDWNAILX040	NAILS, plain iron, for wood, 40mm, (1.1/2")	on request	0.5kg	0	Add

EHDWNAILX050	NAILS, plain iron, for wood, 5cm (2")	on request	1kg	0	Add

EHDWNAILX075	NAILS, plain iron, for wood, 7.5cm (3")	on request	0.5kg	0	Add

EHDWNAILX080	NAILS, plain iron, for wood, 8cm (3"1/6)	on request	1kg	0	Add

EHDWNAILX100	NAILS, plain iron, for wood, 10cm (4")	on request	1kg	0	Add

EHDWNAILX120	NAILS, plain iron, for wood, 12.5cm (5"), 1kg	on request	1kg	0	Add

EHDWNAILX150	NAILS, plain iron, for wood, 15cm (6")	on request	1kg	0	Add

EHDWNAILX200	NAILS, plain iron, for wood, 20cm (8")	on request	1kg	0	Add

General information

Several types of nails for most current usage: assembling of wood structures, attaching roof and wall covers (iron sheets, plastic sheets).

Standard nails are made of iron. Other materials exist (aluminium, stainless steel, copper) for very specific usage.

Different types of corrosion resistance are available.

Uncoated: The nails will rapidly rust unless they are stored in a dry environment. These nails are for dry usage. i.e. indoor wood structures, including inside framing, and wall panels.

Hot deep galvanised: Good level of rust protection. Mandatory for roof nails and recommended for wall cladding nails.

Other types: Barrel hot galvanized, electroplated, peen-plated, are protected to a certain degree. To look at if the two above products do not answer your needs.

Different types of shank are available.

Twisted shank mandatory for roof nails and wall cladding nails.

Standard plain circular shank for other normal applications.

Some specifications may vary with national standards and local market conditions. For locally sourced items, check the relevant national standards or specifications. Any important variation from the EIC standard needs to be approved by a specialist.

Specifications

For all types of nails:

Iron nails, made of carbon steel, cold processed, not heat treated except for galvanisation.

Hot dip galvanised at 300g/m2 +/-10%, or uncoated, as per contract.

Minimum tensile strength 650N/mm2

Unless otherwise specified, nails with flat smooth circular heads, plain shanks and diamond points shall be supplied. Minimum head diameter to be the double of the shank diameter and as per the table below.

Characteristics according to EN10230-1 and EN10016-1 and 2.

In addition, for roof nails only:

Long pitch square twisted or spiral rolled shank. Spring-head type, with sealed umbrella type steel washer + rubber washer. Hot dip galvanised at 300g/m2 +/-10%.

Rubber washer minimum 22mm diameter.

Shank and head diameter according to length, all dimensions in mm:

	Standard nails		Roof nails
Length	Shank diameter	Head diameter	Shank diameter	Head diameter
25	1.4 to 1.6	3.9 to 4	-	-
50	2.2 to 3	5.5 to 6.8	3.4 to 3.8	> 18
70 to 80	3 to 3.8	6.8 to 7.6	3.4 to 3.8	> 18
100	3.8 to 5	7.6 to 10	3.4 to 3.8	> 18
120	4.6 to 5	9.2 to 10	-	-
150	6	12	-	-

Approximate quantity of common nails per kg:

Length x diameter in mm

25 x 1.6

50 x 2.7

75 x 3.5

100 x 4

120 x 5

150 x 6

Roof nails

60x3.8

Roof nails

75x3.8

Quantity in 1kg

2020

440

165

100

118

106