|
Compass (& 1 Pencil) |
Body composed of metal, with sturdy and durable screw ring and pencil. Good quality. Total length of compass (end to end): 105 mm (+/-5%). The screw ring should be adjustable to grip the pencil and a standard-sized pen firmly and uniformly, without slippage. The connection between the two legs of the compass should be sufficiently tight to ensure that there is no movement/slippage of the legs when the compass and attached pen/pencil are being rotated. Plastic must be resistant to breakage, must not deform when pressure is applied and must return to its original form. For the pencil, HB grade, black lead (please refer to specifications for pencil) |
|
Ruler 15 cm |
Composed of robust, hard wearing, clear transparent plastic
Total length: 160 mm (+/-5%)
Calibrated length: 150 mm. Thickness: 2 mm minimum. Along one length, centimetre intervals are annotated (0 to 15 cm) with sub-markings of millimetres.
Graduations and numbers to be accurately, clearly, cleanly and securely printed in black.
Plastic must be resistant to breakage, must not deform when pressure is applied and must return to its original form. |
|
Set square (triangle) 45º, 45º, 90º |
Composed of robust, hard wearing, clear transparent plastic. Angles within the triangle are: 45º, 45º and 90º. The angle dimensions must be accurate. Base length: 110 mm (+/-5%). Thickness: 1.6 mm minimum. Along two lengths, centimetre intervals to be annotated with sub-markings of millimetres. The graduations and markings on the 2 sides should be clearly separated. The base length should be marked and calibrated to at least 10 cm.
Graduations and numbers to be accurately, clearly, cleanly and securely printed in black.
Plastic must be resistant to breakage, must not deform when pressure is applied and must return to its original form. |
|
Set square (triangle) 30º, 60º, 90º |
Composed of robust, hard wearing, transparent plastic. Angles within the triangle are: 30º, 60º and 90º. The angle dimensions must be accurate. Base length: 130 mm (+/-5%). Thickness: 1.6 mm minimum. Along two lengths, centimetre intervals to be annotated with sub-markings of millimetres. The graduations and markings on the 2 sides should be clearly separated. The base length should be marked and calibrated to at least 10 cm.
Graduations and numbers to be accurately, clearly, cleanly and securely printed in black.
Plastic must be resistant to breakage, must not deform when pressure is applied and must return to its original form. |
|
Protractor 180° |
Composed of robust, hard wearing, clear transparent plastic. Base length: 100 mm (+/-5%). Thickness: 2 mm minimum. Main arc: the outer edge of the protractor to be annotated in 10 degree intervals (0 to 180 degrees) with sub-markings of degrees. Should a second arc also be included, the orientation of the numbers (180 to 0 degrees, left to right) and degree markings should be consistent to the main arc.
Graduations and numbers to be accurately, clearly, cleanly and securely printed in black.
Plastic must be resistant to breakage, must not deform when pressure is applied and must return to its original form |
|
Plastic wallet |
Designed to contain the individual items
Resistant to tearing and can be closed. The closure should be easy to open and close without damage to the wallet. The size of the wallet should ensure that items can be contained within the closed wallet without risk of puncture or damage to the contents. The dimensions of the opening should be sufficient to enable the items to be easily inserted and removed. The size of the geometry set should allow it to easily fit into the pocket of a backpack. The wallet must not contain any reference to the manufacturer’s company name, brand, symbol, website or contact details. |
|
Branding |
No commercial branding allowed |