General information
Accessory for Studer Xtender (XTM3500-24, EELEINVTST3.5).
Measures precisely the State of Charge (SoC in %) of the connected battery, in order to have a precise idea of how much energy remains available.
The shunt measuring resistor allows to record all the charge (in Ah) that went into and has left the battery, regardless of how many chargers and inverters are connected.
The BSP500 uses the RCC-02 to set the configuration (namely battery nominal capacity) and to display the current values (State of charge, Energy throughput, battery temperature, battery current, etc.).
To correctly display the battery temperature, either:
- attach the BSP500 to the side of the battery
- attach the battery temperature sensor BTS-01 to the side of the battery
If there is a BTS-01 connected to the system, the temperature will be measured by the BTS-01 only, if no BTS-01 is connected, the BSP500 will measure the temperature.
Purchase via HQ recommended (compulsory for ICRC)
Additional information http://www.studer-innotec.com/en/accessoires/xtender-series/battery-status-processor-bsp-769
Spare parts and Accessories
EELEINVTST3.5 INVERTER/CHARGER, Studer XTM-3500-24, 3.5kVA - 230V, 24V
EELEINVTDCDISTR DC DISTRIBUTION PANEL, 300/80A breaker, shunt, fr backupsyst
EELEINVTRCC02 INVERTER/CHARGER, RCC-02 control panel Studer XTM +SD +cable
EELESOLAVT80ASM SOLAR REGULATOR, VT-80 MPPT, assembl lightn-prot/break./MC-4