|
General quality |
Warm winter jacket with hoodie
Neat and clean, well finished appearance
Free from any imperfections and/or defects
No damage, no holes, no tears or missed fibers
Homogenous quality |
|
Color |
Dark colors only, or as determined in the Purchase Contract
White or very bright colors are not allowed |
|
Color fastness |
Color must be well fixed and not easy to remove by washing or rubbing |
|
Material |
Synthetic fabric
Shell : 100% polyester 300T taffeta fabric
Body lining : 200gr fleece + sleeve lining 210T
Padding : 200gr
Or as determined in the Purchase Contract |
|
Protection against the cold |
The wearer should keep warm at temperatures down to -5C° |
|
Design |
Neutral design only
No religious design or signs allowed |
|
Jacket pockets |
Two pockets: one in each side, right above the waist
Inside pockets are not mandatory |
|
Pocket height |
Between 120 and 160 mm (+/-5%)
For details per size, refer to Specifications file below |
|
Sleeve elastic |
Arm to be finished with an elastic cuff |
|
Waist elastic |
Waist to be finished with an elastic waistband |
|
Reflective bands |
Reflective bands are not mandatory
In case reflective bands are present, one band should be located on the front side (chest height) and another band should be located on the back side (back dorsal area) |
|
Jacket length |
Between 520 and 620 mm (+/-5%)
For details per size, refer to Specifications file below |
|
Jacket external width (at chest height) |
Between 360 and 520 mm (+/-5%)
For details per size, refer to Specifications file below |
|
Jacket circumference |
Between 740 and 1060 mm (+/-5%)
For details per size, refer to Specifications file below |
|
Jacket sleeve length |
Between 440 and 560 mm (+/-5%)
For details per size, refer to Specifications file below |
|
Jacket sleeve width |
Between 190 and 210 mm (+/-5%)
For details per size, refer to Specifications file below |
|
Jacket sleeve elastic width |
Between 100 and 120 mm (+/-5%)
For details per size, refer to Specifications file below |
|
Hoodie height |
Between 230 and 270 mm (+/-5%)
For details per size, refer to Specifications file below |
|
Jacket weight |
Between 400 and 520gr (+/-2%)
For details per size, refer to Specifications file below |
|
Closure method |
Zipper |
|
Zipper type |
Front fly zipper |
|
Zipper material |
Metal |
|
Zipper general quality |
Strong, good quality |
|
GSM weight |
As per sample provided by supplier and approved by the purchaser |
|
Finish |
Continuous stitching or sewing, no broken sewing
No missed fibers |
|
Sewing type |
Sewing |
|
Organoleptic test |
Comfortable touch
No bad smell |
|
Volatile material |
There should be no organic volatile material |
|
Skin irritation |
Should not cause any skin irritation, nor any other harm |
|
Washing |
Should resist several washing cycles (30°C water temperature) without affecting the shape or the integrity of the product |
|
Marking |
A label must be sewn on the inside of the item and include the following information:
- Material/Composition
- Washing directions
- Size
- Country of origin |
|
Certificate of analysis |
A certificate showing compliance with the specified chemical composition is required |
|
Fit for human use |
A certificate is required showing the product is fit for human use (no skin irritation, no recycled or skin harmful materials included / used) |
|
|
|
|
Packaging |
|
|
Primary packaging |
Packaging shall be a strong polyethylene transparent plastic bag
No holes, no tears are allowed
One piece per plastic bag, or as specified in the Purchase Order |
|
Marking on primary packaging |
Marking expected : Item name / Trade mark, Manufacturer name, Quantity per Pack, Country of origin
Marking should be clear and well fixed and not easily gone or erased |
|
Marking on secondary packaging |
Marking expected : Item name / Trade mark, Manufacturer name, product size, Color, P.O number, Country of origin, Gross weight
Marking should be clear and well fixed and not easily gone or erased |