|
General quality |
Same material and color to be used for the sweatshirt and pants
Neat and clean, well finished appearance
Free from any imperfections and/or defects
No damage, no holes no tears or missed fibers
Homogenous quality |
|
Color |
Homogenous dark colors only
No white or bright colors allowed
Or, as specified in Purchase Contract |
|
Color fastness |
Color must be well fixed, and not be easy to remove by washing or rubbing |
|
Material |
100% cotton or mixed 50% cotton and 50% polyester, or as specified in Purchase Contract |
|
Design |
Neutral design only
No religious design or signs are allowed |
|
Thickness for both sweatshirt and trousers |
2 mm minimum (All sizes), or as specified in Purchase Contract |
|
GSM weight |
290 gsm minimum, or as specified in Purchase Contract
|
|
Finishing |
Continuous stitching or sewing, no broken sewing
No missed fibers |
|
Sewing type |
Stitching 3 lines |
|
Organoleptic test |
Comfortable touch
No bad smell |
|
Volatile material |
There should be no organic volatile material |
|
Skin irritation |
Must not cause skin irritations, nor any other harm |
|
Washing |
Must resist several washing cycles at 30°C water temperature without affecting the shape or the integrity of the product |
|
Marking |
A label should be sewn on the inside of the item and include the following information:
- Material/Composition
- Washing directions
- Size
- Country of origin |
|
Certificate of analysis |
A certificate showing compliance with the specified chemical composition is required |
|
Fit for human use |
A certificate is required showing the product is fit for human use (no skin irritation, no recycled nor skin harmful materials included / used) |
|
Sweatshirt |
|
|
Dimensions per size |
Refer to Specifications file below |
|
Sweatshirt thickness |
2 mm minimum |
|
Pants |
|
|
Pockets |
2 pockets: one on each leg, right below the waist elastic |
|
Dimensions per size |
Refer to Specifications file below |
|
Trouser thickness |
2 mm minimum |
|
|
|
|
Packaging |
|
|
Primary packaging |
Packaging shall be a strong polyethylene transparent plastic bag
No holes, no tears
One piece per plastic bag, or as specified in the Purchase Order |
|
Marking on primary packaging |
Marking expected : Item name / Trade mark, Manufacturer name, Quantity per Pack, Country of origin, Item Size
Marking should be clear and well fixed and not easily gone or erased |
|
Secondary packaging material |
Strong carton of a good export quality, minimum 5 ply (layers) and 500 gsm, assembled with metal staples and/or firmly sealed with large 50 mm minimum adhesive tape
Carton dimensions to fit the content, no empty spaces are to be left
No holes, no tears |
|
Marking on secondary packaging |
Marking expected : Item name / Trade mark, Manufacturer name, product size, Color, P.O number, Country of origin, Gross weight
Marking should be clear and well fixed and not easily gone or erased |