General information
The required quantity for the development of X-ray films is about 1 liter/m².
22.5 litres can develop:
Specifications
Used for manual development of X-ray films.
Developer: MXRADEVLP22
Description:
Concentrated developer in powdered form for dilution; makes 22.5 litres of working solution. Normal processing or automatic processing machines may require a different developer. Specify the machine type when ordering. Clear and explicit instructions should appear on the label.
Storage:
Once prepared, the developer solution should be used within the two proceeding months; store between 15 and 18ºC, and protected from sunlight and air to avoid oxidation. It is indicated to prepare this solution in two times.
Note:
Can be used to manually develop either green- or blue-sensitive films.
Packaging:
Product is corrosive and for air transport must follow DGR-UN3077 class 9 (DGR UN Code/ 3077.9), packaging must comply with IATA rules. Clear and explicit instructions should appear on the label.
Fixer: MXRAFIXEP22
Concentrated fixer in powdered form for dilution; make 22.5 litres of working solution.
Once prepared, the fixer solution should be used within the proceeding two months; store between 15 and 18ºC and protect from sunlight.
Product is corrosive, but not classified as a DGR for air transport. Clear and explicit instructions should appear on the label.
Automatic processing
Select the developer and fixer that complies with your automatic processor.
We will give some explanation for developer and fixer matching the automatic processor
Developer MXRADEVLG12: Agfa Curix 60 and CP1000: automatic tabletop processors.
Specifications:
G153, in liquid form, is provided in 2 separate containers: bottle G153 A 1000ml and bottle G153 B 250ml; to preparing 2.5 litres of developer solution.
Other:
Local purchase is recommended.
Fixer MXRAFIXEG18: Agfa Curix 60 and CP1000: automatic tabletop processor.
Product name:
Fixer G354, in liquid form, is a standard, single-part, non-hardening, low-odour fixer for automatic tabletop processors.
Best results are obtained when combined with G354 with G153 developer for automatic tabletop processors.
The G354 fixer contains an acetic acid pH buffer and sodium sulphite to prevent the fixing salt in the fixer from decomposing. Due to its high pH, the emission of both acetic acid and sulphur dioxide using G354 has been greatly reduced.
Replenishment:
The replenishment rate varies from 300 to 1000 ml/m2 for tabletop processors.
NOTE: When ordering, identify the brand name and serial number of the automatic X-ray film processer; order through the manufacturer’s authorized dealer in the country.
Use only those chemical products recommended by the manufacturer.