last updated : 2020/02/27
Code Description Budget Price Ship. weight Ship. vol.
BED SHEET, white cotton 150g, 2 x 2.35m, 1 sheet CH 29.70 0.96kg 2,775L Add
BED SHEETS, white cotton 150g, 2x2.5m, 2 sheets, 2 pillowca. CH 30.00 0kg 0 Add
BED SHEET, white cotton 150g, 1.5m x 2.5m, 1 sheet CH 29.40 0kg 0 Add
BED SHEETS, white cotton 150g, 1.5x2.5m, 2 sheets, 1 CH 12.00 1.2kg 4,56L Add
PILLOWCASE, white cotton 150g/m2, for pillow 60x60cm on request 0kg 0 Add
BED, CAMP, FOLDABLE, for team CH 24.00 2.8kg 5,85L Add
HOT-WATER BOTTLE, rubber on request 0kg 0 Add
MATTRESS, camping, foam 1.85 x 0.48 x 0.01m, 200g CH 11.00 0kg 0 Add
MATTRESS, camping, foam, 2 x 0.7 x 0,06m, 2kg CH 10.00 0.6kg 0,02844m³ Add
PILLOW, cotton cover, foam filling, 0.6 x 0.6 x 0.2m CH 7.00 0kg 0 Add

General information

Mattresses for distribution.

For hospital bed mattress, see item code XMEQBEDSH1M

Foam density is one of the factors determining the quality.  Low grades are from 18 to 22kg/m³; medium grades from 22 to 27 kg/m³; high grades above 27kg/m³. The minimum quality for a bed mattress should be 22kg/m³.

Unit conversion: pound per cubic feet to kilogram per cubic meter. 1lb/cuft = 16kg/m³

The standard quality is open cell foam. Higher quality is made from closed cell foam.

The factor determining the firmness is the Identation Load Deflexion.  This factor may vary from 5 to 100kg.

Sag factor gives an indication of cushioning quality. A high value indicates a resistance to “bottoming out.”

Air flow measures the capacity of the foam to evacuate moisture.

Impact Resilience is a measure of elasticity, bounce, or springiness of foam.

Some specifications may vary with national standards and local market conditions. For locally sourced items, check the relevant national standards or specifications. Any important variation from the EIC standard needs to be approved by a specialist.


Type of foam

Medium: Polyurethane foam, 25kg/m³; thickness: 10cm. Minimum, in 1 piece not glued


High: Polyurethane foam, 35kg/m³; thickness: 15cm. Minimum, in 1 piece not glued

Identation Load Deflexion

16kg minimum

Sag factor

Greater than 2.0

Air flow CBM/mn

Max. 0.11

Elongation (%)

125 – 175

Impact Resilience (%)

Greater than 30


Woven polyester 75g/m² minimum OR non-woven polypropylene of 100g/m² minimum, with strong plastic zip.

Tear strength minimum: 6DaN under ISO 9073-4 or BS9073-4


Packed in polyethylene bag, compressed to minimum 75% rate.

Recovery after opening: minimum 96% after 24h

Rolled and compressed individually

OR compressed bales of 10 units, not rolled

OR not compressed – all mattresses must be individually packed in plastic