|
Components: |
- Sphygmomanometer parts: |
|
|
Aneroid pressure gauge (no stop pin) with an air pressure release-valve. |
|
|
Rubber bulb with palm fitting handle. |
|
|
Connector to rubber tube. |
|
|
Connecting tube. |
|
|
Cuff with inflatable bladder. |
|
Materials: |
Hardened copper-beryllium: membrane or diaphragm. |
|
|
Stainless steel: handle |
|
|
Nickel-plated: tube connector and valve. |
|
|
Nylon: cuff with velcro fastener |
|
|
Latex: connecting tube, bulb, inflatable bag. |
|
Specifications: |
A sphygmomanometer consists of an inflatable cuff, a measuring unit (the manometer), a tube to connect the two, and an inflation bulb, which is also connected by a tube to the cuff. The inflation bulb contains a one-way valve, to prevent inadvertent pressure leakage, with an adjustable screw valve with which the operator can lower the pressure in the system in a controlled manner. |
|
|
Adult, palm style, sphygmomanometer with one tube. |
|
|
Manometer, aneroid gauge: |
|
|
- An aneroid manometer is a mechanical gauge with a round dial and a needle that rotates to indicate pressure in mmHg. On the inside, a bellow and spring mechanism senses and transmits the blood pressure measurement to the dial. |
|
|
Diameter: 63mm |
|
|
Linear scale: graduated from 0-300mmHg, easy-to-read, maximum error throughout range ±3mmHg. |
|
|
Diaphragm membrane: can withstand overpressures of up to 600mmHg. |
|
|
- Connector to rubber tube: on the right-hand side, below the manometer. |
|
|
- Inflation bulb: to inflate or deflate the rubber-bag cuff. |
|
|
Mounted with a one-way valve, to prevent inadvertent pressure leakage, with an adjustable screw valve with which the operator can lower the pressure in the system in a controlled manner. |
|
|
Cuff: Washable at 30°C, made of non-deformable material with velcro fastening to enable a tight adjustment around the arm. |
|
|
Inside the cuff is an inflatable airbag (bladder); it must be airtight. Size: 22x10cm. |
|
|
XMEQSPHYRIAC14: length 54.5cm, width 14cm |
|
Packaging: |
The following information must appear on the outside packaging: |
|
|
- Designation of item, multilingual if possible (English, French and Spanish, others when available.) |
|
|
- Name and address of supplier (manufacturer) and CE mark and reference number of notifying body. |
|
|
- Enclosed inside packaging: manufacturer’s certificate of guarantee and multilingual instructions for use and maintenance: Must be multilingual: English, French and Spanish, others when available. |
|
Other requirements: |
Conforms to EN 1060-1-1A –2002 and EN 1060-2-1995 |