Homepage[Homepage] - [Newsletter]
orAdvanced search  Contact
Volume 1
 Warehouse and Administration
 Relief and Logistics Kits, ERU, RDU
 Personnel security equipment
 Radio and Telecommunication
 Power supply and electrical equipment
 Tools and Hardware
 Shelter and construction materials
 Vehicles and consumables
 Water and Sanitation

Volume 2
 Drug products
 Medical disposable supplies
 Medical equipment
 Cold chain
 Physical Rehabilitation

Volume 3
 Basic health care ERU
 Emergency care and triage
 Rapid Deployment Emergency Hospital
 Referral hospital ERU
 Surgical hospital, weapon wounded
 Medical kits
 Feeding and nutrition Kits
 Medical sets
 Surgical instruments and sets

 Item database, codes and description
 Units conversion
 Medical weight and volume
   Water pipe, PE
(Water and Sanitation > Hoses and pipes)
last updated : 2011/01/01
Product page
CodeDescriptionInd. priceShip. weightShip. vol.
PIPE, MDPE polyethylene, d.ext: 21mm, NP10, coil, per meterCHF 2,70
PIPE, MDPE polyethylene, d.ext: 32mm, NP10, coil, per meteron request
PIPE, MDPE polyethylene, d.ext: 63mm, NP10, coil, per meteron request36,4kg0,6534m³

General information

Polyethylene pipes appropriate for both suction and delivery.

Can be assembled using compression coupling up to 125mm or fusion welding.

Compared to other plastics, polyethylene has a good resistance to acids and caustic substances. It is also resistant to organic and inorganic solvents at a wide range of temperatures. It is, however, not resistant to strong oxidizing acids.

PE100 is preferred to PE80 due to its better strength and durability, higher operating pressures, lower sensitivity to surface damage during laying, and improved resistance to rapid crack growth.


  1. -      Pipes are generally available in 3, 5 or 6m straight lengths and 25 or 50m rolls.
  2. -      When ordering pipes quote both the desired interior and exterior diameters; this will have an influence on the fittings.
  3. -      Outside diameter (OD) is also called Diameter Nominal (DN) or Nominal Diameter (ND) and is given in millimetres.
  4. -      Designating the outside diameter ensures pipes of the same size will fit together, regardless of wall thicknesses.
  5. -      Internal diameter ID. The outside diameter is fixed for a given pipe size, however, the inside diameter will vary depending on the thickness of the pipe's wall .
  6. -      Ensure the supplier can match the fittings to the pipes.


PE100 drinking water pipes.

Resistant to acids, caustic substances, and organic and inorganic solvents.

Good material strength and fatigue resistance.

Operating temperature range -40°C to +65°C.

About this site and copyright
powered by SolidPepper