General information
To back up the power supply of 220V equipment with an independent power source.
Not suitable to power heavy machinery. This should be used only for equipment which does not accept any power cuts (mainly IT equipment).
Specifications
APC Smart-UPS 750VA USB & Serial 230V
500 Watts / 750 VA, Input 230V / Output 230V, Interface Port DB-9 RS-232, USB, SmartSlot
Includes: CD with software, Smart UPS signalling RS-232 cable, USB cable, User Manual
|
Output |
|
|
Output Power Capacity |
500 Watts / 750 VA |
|
Max Configurable Power |
500 Watts / 750 VA |
|
Nominal Output Voltage |
230V |
|
Output Voltage Note |
Configurable for 220 : 230 or 240 nominal output voltage |
|
Output Voltage Distortion |
Less than 5% at full load |
|
Output Frequency (sync to mains) |
47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal |
|
Crest Factor |
up to 5 : 1 |
|
Waveform Type |
Sine wave |
|
Input |
|
|
Nominal Input Voltage |
230V |
|
Input Frequency |
50/60 Hz +/- 3 Hz (auto sensing) |
|
Input voltage range for main operations |
160 - 285V |
|
Input voltage adjustable range for mains operation |
151 - 302V |
|
Battery Type |
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
|
Typical recharge time |
3 hour(s) |
|
Replacement Battery |
1 x RBC48 |
|
Typical Backup Time at Half Load |
16.4 minutes (250 Watts) |
|
Typical Backup Time at Full Load |
4.8 minutes (500 Watts) |