General information
Codan HF transceiver NGT SRx, base station with fan for data transmission.
Codan NGT SRx replaces Codan NGT-SR, which is no longer available.
SRx has a new desktop console. It looks the same as that of the SR, but they are not compatible! The cable connectors between the RF unit and console are different (the so-called junction box, previously located in the console, has been integrated into the RF unit).
Programming software must be version 4.11 or higher, SRx compatible.
The equipment should be tested prior to being shipped to the field.
NGT SR and NGT SRx transceivers are the standard models best adapted to our needs. Only standardized equipment approved by the secretariat in Geneva may be used. Other versions of these transceivers may be found in many places, but have different or missing options.
Country-specific restrictions may impose a TxP option with certificate (it is not programmable; frequencies are preset at factory - e.g., Sri Lanka). Clarify with RES_SI/OPS before ordering.
Each technician should have a CD with:
- programming software
- reference manual, user guide and technical manual
Specifications
|
Tx frequency range: |
2 - 26.5MHz |
|
Rx frequency range: |
500kHz - 30MHz |
|
Power output: |
100W |
|
DC consumption: |
Tx max: 12A, Rx 0.8A |
|
Signalling system: |
selcall 4 and 6 digit |
|
GPS: |
GPS enabled |
|
Channel capacity: |
400 (soft and front-panel programmable) |
|
Antenna connector: |
PL 259 |
|
Display: |
graphic display |
|
Protection: |
overvoltage / battery reverse |