General information
Solar PV panels kit
Contains 9 panels (300W, 60 cells, 40Voc), all necessary cables and junctions
Mounting brackets to fix the panels on the roof or on a wall
To be connected in 3 parallel strings of 3 panels in series per string
Voltage will be about 120V (open circuit), max current approx. 27A
With these panels (60 cells), always use an MPPT charge controller, never a PWM type. The maximum power of the 9 panels is approx. 2700 Watts, although the charge controller VT-80 will limit the maximum power to the battery to about 2000 Watts. The advantage of that slight oversizing of the PV array is that there will be more energy harvested in low-light conditions (morning, evening). The oversizing of the PV array does not pose any problems for the charge controller
The panels are quite big and heavy, approx. 1,6m x 1m and 18kg each. Be sure, you can transport and bring them to the installation location easily.
If size and weight may be an issue, consider the KENGSOLA15x100 or KENGSOLA20x100 instead, their panels are much lighter and smaller making them easier to transport and install
The charge controller is NOT INCLUDED, it must be ordered separately
Purchase via HQ recommended (compulsory for ICRC)
Specifications
|
Features
|
9 Solar PV Panels of approx. 300W each
2.7kW peak power approximately
Junction box for paralleling 3 strings of panels, including disconnect switch
All necessary cables (4mm2, with MC-4) to connect 3 strings to junction box
Cable 30m long, 4mm2, for connection from junction box on the roof to charge controller in server room
All necessary elements for aluminium racks for flat roof |
|
Dimensions |
Approx.160x100cm (one panel) |
|
Weight |
18kg (one panel) |
|
Installation tools |
None supplied |
Spare parts and accessories
EELESOLAVT80ASM SOLAR REGULATOR, VT-80 MPPT, assembl lightn-prot/break./MC-4
EELEINVTST3.5 INVERTER/CHARGER, Studer XTM-3500-24, 3.5kVA - 230V, 24V
EELESOLBAxxxx Batteries, solar, sealed Gel, various capacities 400-1200Ah